
SOL 251
Rejects 72% of total solar energy
or €86.40 incl. VAT
Choose an available variant.
Sold by linear metre
Minimum 5 metres, in 1-metre increments.
Cut to shape
Select a width and length first.
Glazing compatibility
Installation position
Application method
The surface to be covered must be free of dust, grease or any other contaminant. Some materials such as polycarbonate may cause bubbling issues. A compatibility test is therefore recommended.
Description
SOL 251 is a metallised bronze solar-control film designed for installation on the interior face of glazing. Its warm finish is well suited to offices, hotels, shops, homes and buildings where bronze complements the architecture better than a silver appearance.
It rejects 72% of total solar energy, with 37% reflection, 12% transmission and 51% absorption. Its solar factor g of 0.28 effectively limits heat gain. Visible light transmission of 14% creates a subdued atmosphere and helps reduce glare. The film filters 95% of UV radiation.
SOL 251 has a 50 µm PET base, a 20 µm siliconised PET release liner and a polymer acrylic adhesive. It can be installed from 5°C with a suitable application solution. According to the Reflectiv technical data sheet, it is suitable for all glazing types when installed internally. Its fire classification is B-s1,d0 and its interior warranty is 10 years.
Cleaning may begin 30 days after installation. Use a mild ammonia-free solution with a soft cloth or non-abrasive squeegee to protect the film surface.
Durability
Manufacturer warranty: 10 years. Actual service life depends on exposure, glazing quality, correct installation and maintenance.
Maintenance
30 days after installation.
Storage
2 years from delivery. Store away from excessive humidity and sunlight, at a temperature below 38°C.
Similar products
Frequently asked questions
Delivery
within 48h
REFLECTIV ENSURES DELIVERY WITHIN 48 HOURS IN MAINLAND FRANCE AND 72 HOURS IN THE REST OF THE WORLD







