Dinov Range

The positioning liquid sprayed onto the glass before applying the film. It creates a slippery layer between the glass and the adhesive, giving the installer time to adjust and align before squeegeeing.

The natural formulation provides the same glide and working time as a conventional solution. The film moves easily during positioning, does not drift on vertical glass surfaces, and evaporation is gradual and consistent. The difference: no trapped chemical residue between the film and the glass, and no volatile compounds inhaled by the installer during long application sessions.

The dosage can be adjusted depending on temperature and film type. In hot weather, a slightly stronger concentration compensates for faster evaporation. In cold weather, a lighter dosage is sufficient. Dilution instructions are provided on each container.

Supplied as a concentrate. One liter yields several liters of ready-to-use solution.

A surface preparation cleaner that leaves nothing behind. No ammonia, no petrochemical solvents, no synthetic anti-streak agents. Only plant-based surfactants that degrease the surface and evaporate without leaving a film.

This is key to installation quality. Conventional glass cleaners leave an invisible film on the glass that interferes with adhesive bonding. Dinov cleaner leaves a chemically neutral, perfectly clean surface, ready for maximum adhesion.

It is also suitable for regular maintenance of filmed glass. Compatible with all types of adhesive films, it cleans without damaging the film surface or altering its tint or adhesive. One product for both preparation and maintenance. It is also a product that installers can use all day in enclosed spaces without worrying about fumes. No irritating vapors, no chemical smell, no respiratory risk.

A removal solvent that dissolves adhesive residues without harsh chemicals. When an old film is removed, adhesive residues remain that water and standard cleaners cannot remove. Dinov adhesive remover dissolves them in minutes using naturally derived active ingredients.

Spray or apply with a cloth, let it act for two to three minutes, then wipe or scrape. The softened adhesive comes off easily. The glass surface becomes clean again and ready for a new film installation.

The formulation is safe for window seals made of rubber, silicone, and EPDM. No toxic emissions during application. On job sites where films are replaced in occupied offices or open shops, this is a real advantage: no need to evacuate occupants or ventilate heavily during the work.

For very old and hardened residues, allowing the product to sit for five to ten minutes improves effectiveness. If residues remain, a second application is more effective than excessively extending the first one.

Two approaches, same natural philosophy: prevent and clean without pollution.

The preventive treatment is applied to the installed film. It creates an invisible protective layer based on natural active ingredients that prevents spray paint, permanent markers, and paint from adhering to the surface. When the glass is tagged, the ink remains on the surface and can be wiped off. The underlying film is not affected.

The cleaning product dissolves tags and markers using plant-based solvents. Spray, let it act, wipe. The glass returns to its clean state without removing or replacing the film. No harmful chemical discharge into wastewater, no toxic vapors for the operator.

Both products work together. The preventive treatment makes cleaning easier. A treated surface can be cleaned in one minute. An untreated surface may require several passes. For storefront windows, using both together is recommended.

The preventive treatment must be reapplied after each cleaning to maintain protection.

For installers, working with natural products is both a commercial argument and a health choice. Companies and public organizations increasingly include environmental criteria in their tenders and specifications. Offering an intervention with certified eco-responsible products meets these requirements without compromising work quality.

The safety data sheets for the Dinov range are clean. No environmental hazard pictograms, no mention of health risks under normal use. This makes it easier to present in public tenders, HSE audits, and environmental certification processes.

For the installer, it also improves daily comfort. Working 8 hours a day with products that do not sting the eyes, burn the hands, or affect breathing improves overall working conditions.