Clear solar protection

Dimensions (of rolls)
  • 1.52 x 2.5 m
  • 1.52 x 10 m
  • 1.52 x 30 m
Shipping time
24 / 48h


Solar film IR 50 returns over 50% of the heat and reduces UV radiation. The film keeps the glass transparency and does not disperse light in all directions. It is a genuine contributor of comfort improvements. It saves energy related to air conditioning use as well.


Composition of heat resistant window films

The solar protection adhesive film is composed of two layers of polyester vacuum-metalized, an adhesive and a protective film (which is to be removed during the installation). They have an anti-scratch coating.

Solar Control

To avoid overheating:

  • ensure air circulation,
  • use films with a limited energy transmission, called “Anti-Heat Films”, which allow only a certain fraction of the solar energy to pass through, enabling the light to be conserved by minimizing overheating,
  • save energy related to the use of air conditioners,
  • gain up to 10 °C temperature,
  • improve comfort,
  • reduce glare.

Solar Factor

Solar factor (G) of a window is a ratio between the total energy entering a room through the window and the incident solar radiation. This total energy is the sum of the solar energy entering by direct transmission, and the energy yielded by the glazing to the interior atmosphere, following its heating by energy absorption.

Greenhouse Effect

Solar energy entering a room through a glazing is absorbed by objects and internal walls which when heated re-emit thermal radiation located mainly in the far infrared (greater than 5 μm). Glazing, even light, is practically opaque to radiations of wavelengths greater than 5μm. The solar energy entering through the windows is therefore trapped in the room which tends to heat up. It is the “greenhouse effect” that can be seen for example when a car is parked in direct sunlight with closed windows.

Application Method

The glass surface to be glued on has to be free from dust, grease or other contaminants. Some specific materials such as polycarbonate can cause air bubble problems. Therefore, a compatibility test is recommended. For more precision we recommend to refer back to the application table.

Production and standards

In order to constantly improve our production we may change a product colour and manufacturing process without prior notice. Before applying our products we recommend that our users ensure that the film is suitable for the intended use and comply with current standards.

In order to maintain the high level of quality, we do not recommend mixing different film productions when applying films



Material: PET 23 microns

Adhesive: acrylic polymer 19 gr/m²

Liner: siliconized polyester 23 microns

Color: Blue

Application: internal

Warranty: 10 years

Solar Factor G: 48%

Total Solar Reflection: 41%

Total Solar Absorption: 16%

Total Solar Transmission: 42%

Visible Light Transmission: 60%

Visible Light Reflection: 28%

Total Solar Energy Rejected: 52%

UVA Transmission: 1%

Application Temperature: min. + 5°C

Fire Rating: B-s1,d0

Standards: Euroclasses

12 years

from 12 to 15 years for vertical application in central Europe.


Réflectiv window films are designed for use on any type of clear normal glass

Maintenance after
30 days

with usual cleaning solutions (non-abrasive, without ammonia…). Cleaning products that may scratch the film should be avoided.

2 years

from delivery. This film should be kept away from excessive humidity and sun rays, at temperatures below 38°C.