Fiche technique
Films de visualisation
Red stripe
These visuals films allow you to see and distinguish completely clear partitions or glass separations in public areas. They are especially helpful in are as where partial or full coverage is not necessary.
Details : transparent red stripe
Utilisation :
Entrance doors, automatic doors, office boxes, hospitals, airports, schools, shops, railway stations, museums…
Méthode d'application :
Internal surface with soapy water.
Cliquez pour agrandir
Entretien du vitrage :
Solution of soapy water, 30 days after installation. Products that could scratch the film should not be used. Do not put stickers or any other adhesives on the film.
Durabilité :
10 to 12 years for inside vertical application in Central Europe.
Stockage :
2 years from the delivery. This film should be kept away from excessive moisture and away from direct sunlight at temperature below 38° C.
Remarques importantes :
The adhesive surface must be free of dust, grease or other contaminants.
| Classement au feu | M1 |
|---|---|
| Support | Polyester 23 microns |
| Adhésif | Acrylic polymer 13 gr/m² |
| Couleur | Red deep dyed |
| Protection | Sylicone Polyester 23 microns |
| Application | Internal |
| Résistance thermique | Minimum 5°C |
| Température d’application | Minimum 5°C |