Fiche technique
Films anti-chaleur
SOL 101
The solar protection adhesive film SOL 101 allows overcoming the greenhouse phenomenon effectively. This film rejects 75% of solar energy and reduces the overheating keeping the external vision. It is a real factor for improved comfort.
The solar protection adhesive films are composed of 2 layers of vacuum-metalized polyester, an adhesive and a protective film (which is to be removed while installation). They are scratch-proof.
Utilisation :
For all types of mineral or synthetic glass exposed to the sun.
Méthode d'application :
Internal surface with soapy water.
Cliquez pour agrandir
Entretien du vitrage :
Solution of soapy water, 30 days after installation. Products that could scratch the film should not be used. Do not put stickers or any other adhesives on the film.
Durabilité :
15 to 20 years for vertical application in Central Europe.
Stockage :
2 years from the delivery. This film should be kept away from excessive moisture and away from direct sunlight at temperature below 38° C.
Remarques importantes :
The adhesive surface must be free of dust, grease or other contaminants. Some materials such as polycarbonate can cause the surface bubbling. A compatibility test is recommended.
In case of windows exposed to the sun, of type "double glazing, tinted glass, laminated glass, or thick ice" : contact us or follow the UTD no. 39.
| Classement au feu | M1 |
|---|---|
| Support | Polyester 36 microns |
| Adhésif | Acrylic polymer 19 gr/m² |
| Couleur | Metalic silver |
| Protection | Sylicone Polyester 23 microns |
| Application | Internal |
| Réflection énergie solaire | 55% |
| Absorbtion énergie solaire | 33% |
| Transmission énergie solaire | 12% |
| Transmission lumière visible | 16% |
| Réflection lumière visible | 60% |
| Energie solaire rejetée | 75% |
| Transmission des U.V. | 5% |
| Résistance thermique | from -20° to 80°C |
| Température d’application | Minimum 5°C |