Technical data sheet
Decorative white films
INT 212
The decorative films allow you to personalize a window, wall or glass cabinet and to preserving privacy. These films soften the light without screening the light off.
Design details : stripes of 13 mm x 6 mm of clear film
Use :
Facades, office boxes, computer rooms, hospitals, ground-floor premises, schools, workshops, shop windows decoration, etc …
Application method :
Internal surface with soapy water.
Click to enlarge
Glass maintenance :
Solution of soapy water, 30 days after installation. Products that could scratch the film should not be used. Do not put stickers or any other adhesives on the film.
Durability :
12 to 15 years for inside vertical application in Central Europe.
Storage :
2 years from the delivery. This film should be kept away from excessive moisture and away from direct sunlight at temperature below 38° C.
Important factors :
The adhesive surface must be free of dust, grease or other contaminants. Some materials such as polycarbonate can cause the surface bubbling. A compatibility test is recommended.
In case of windows exposed to the sun, of type "double glazing, tinted glass, laminated glass, or thick ice" : contact us or follow the UTD no. 39.
| Fire performance class | M1 |
|---|---|
| Material | Polyester 36 microns |
| Adhesive | Acrylic polymer 13 gr/m² |
| Color | White and transparent |
| Release liner | Sylicone Polyester 23 microns |
| Application | Internal |
| Thermal resistance | from -20° to 80°C |
| Application temperature | Minimum 5°C |