Technical data sheet
Full frosted films
INT 200
This adhesive film turns all the windows into white frosted glass. It completely obscures vision but allows light to pass, and allows you to hide away from prying eyes and at the same time maintains the brightness of space.
Use :
Facades, office boxes, computer rooms, hospitals, ground-floor premises, schools, workshops, shop windows decoration, etc …
Application method :
Internal surface with soapy water.
Click to enlarge
Glass maintenance :
Solution of soapy water, 30 days after installation. Products that could scratch the film should not be used. Do not put stickers or any other adhesives on the film.
Durability :
12 to 15 years for inside vertical application
in Central Europe.
Storage :
2 years from the delivery. This film should be kept away from excessive moisture and away from direct sunlight at temperature below 38° C.
Important factors :
The adhesive surface must be free of dust, grease or other contaminants. Some materials such as polycarbonate can cause the surface bubbling. A compatibility test is recommended.
In case of windows exposed to the sun, of type "double glazing, tinted glass, laminated glass, or thick ice" : contact us or follow the UTD no. 39.
| Fire performance class | M1 |
|---|---|
| Material | Polyester 36 microns |
| Adhesive | Acrylic polymer 13 gr/m² |
| Color | White frosted |
| Release liner | Sylicone Polyester 23 microns |
| Application | Internal |
| Solar energy reflection | 18% |
| Total solar absorption | 15% |
| Solar energy transmission | 67% |
| Visible light transmission | 69% |
| Reflection of visible light | 20% |
| Solar energy rejected | 28% |
| U.V. transmission | 2% |
| Thermal resistance | from -20° to 80°C |
| Application temperature | Minimum 5°C |